150mm x 25mm Magnetic Rod

Product Details

  • Product Code: ROD150
  • Coating/Casing: Stainless Steel
  • Direction of Magnetism: N/S along length
  • Magnet Type: Neodymium
  • Magnet Grade: N50 / N52M
  • Max Magnet Temperature: 80°C / 100°C
  • Gauss Strength: 10,000 - 14,000 Gauss
  • Pull Range: 12.5 mm - 15 mm

Product Dimensions

  • Length: 150 mm
  • Diametre: 25.4 mm
  • Hole Thread: M8
Excl. GST Incl. GST
$327.75 Incl. GST
Quantity discounts
  1-4 5+
10,000 - 11,000 Gauss $327.75 $294.98
13,000 - 14,000 Gauss $426.08 $383.47

Our standard stocked 150mm Magnetic Rod made from N50 Grade Neodymium Magnet producing a surface gauss strength of 10,000 – 11,000 gauss.
This Magnetic Rod has a maximum heat tolerance of up to 80°C, temperatures above this will cause the system to slowly demagneise.

$327.75 Incl. GST

In stock

  • Text to engrave to your Magnetic Rod *

    Let us know what you want engraved onto your Magnetic Rod.
    Please note that there is a maximum of 20 characters per unit.

  • Text to engrave to your Magnetic System *

    Let us know what you want engraved onto your Magnetic System.
    Please note that there is a maximum of 20 characters per unit.

$327.75

This 150mm x 25mm Magnetic Rod has a Neodymium magnet encased in a 316 stainless steel tube. It is 150mm long, has a diametre of 25.4mm and M8 tapped ends.
It is fully welded and made to the international HACCP 0909 magsep 2-2024 standard with a test certificate supplied with the unit. We recommend that the unit is tested annually to fulfil requirements of food safety audits.
Each rod also comes with complementary engraving for a serial number to allow for unit tracking and accurate historical reporting of the unit.

These are available as an in stock solution with a surface reading of 10,000 – 11,000 gauss or made to order with the highest grade material in the industry to create a surface gauss of 13,000 – 14,000 gauss.

Ask us about our 150mm x 25mm Magnetic Rod using our stock code ROD150 to see what else it can do for you.

Uses for our 150mm x 25mm Magnetic Rod:

Our Magnetic Rods are widely used in the food and dairy industry to protect their product from ferrous metal contaminant. From large magnetic separator systems to small single drawers these rods extract any ferrous contaminant that may be present to keep your product contaminant free and avoid costly product recalls.

All our Magnetic Tubes are N50 grade to provide maximum strength so they can achieve surface gauss levels in excess of 11,000-12,000 and made from high quality stainless steel to help provide a long lifespan and by being fully sealed comply with the international HACCP 0909 MAGSEP 2-2024 standard used by many food producers around the world.

We stock a large range of sizes of these high powered Neodymium Magnetic Rod  but should we not have the size you require, or if you require a magnet to run at a higher temperature than our standard neodymium rods, we are able to custom make to size. All rods come with a test certificate of conformity showing their magnetic strength.

See below for our available stock sizes, all with a diametre of 25.4mm.

Length Ends Gauss Strength
50 mm M8 Tapped 10,000 – 14,000 Gauss
75 mm M8 Tapped 10,000 – 14,000 Gauss
100 mm M8 Tapped 10,000 – 14,000 Gauss
150 mm M8 Tapped 10,000 – 14,000 Gauss
175 mm M8 Tapped 10,000 – 14,000 Gauss
200 mm M8 Tapped 10,000 – 14,000 Gauss
200 mm Sealed Ends 10,000 – 14,000 Gauss
250 mm M8 Tapped 10,000 – 14,000 Gauss
260 mm M8 Tapped 10,000 – 14,000 Gauss
300 mm M8 Tapped 10,000 – 14,000 Gauss
350 mm M8 Tapped 10,000 – 14,000 Gauss
400 mm M8 Tapped 10,000 – 14,000 Gauss
425 mm M8 Tapped 10,000 – 14,000 Gauss
450 mm M8 Tapped 10,000 – 14,000 Gauss
500 mm M8 Tapped 10,000 – 14,000 Gauss

 

Protect your investment by conducting yearly validation testing to ensure your magnets are operating at peak performance and to conform to food safety audit requirements. Available as a call out service to have them freighted to us and we can test then return them to you.