Neodymium Pots With Rubber Boot
25MM X 8MM NEODYMIUM POT
Neodymium Pots With Rubber Boot
25MM X 8MM NEODYMIUM POT
CAPN25
CAPN25-A
Neodymium-Pots-With-Rubber-Boot

25mm x 8mm Neodymium Pot

Product Details

  • Product Code: CAPN25
  • Max Breakaway Force: 14 Kgs
  • Coating/Casing: Nickel
  • Direction of Magnetism: Through Thickness
  • Magnet Type: Neodymium
  • Magnet Grade: N45
  • Max Magnet Temperature: 80°C

Product Dimensions

  • Diametre: 25 mm
  • Thickness: 8 mm
  • Hole Diametre: 5.5 mm
Excl. GST Incl. GST

$10.81 Incl. GST

Quantity discounts
1-9 10-49 50-99 100-499 500+
$10.81 $9.73 $8.11 $6.49 $5.41

Our 25mm x 8mm Neodymium pot has an outside diameter of 25mm, a thickness of 8mm and a 5.5mm hole. This holding magnet has a pull force of 14 kilograms before releasing. (on a 10mm mild steel plate)

Customers can identify our 25mm x 8mm Neodymium pot with our stock code: CAPN25

Uses for our 25mm x 8mm Neodymium Pot:

Inside a round steel, casing sits a mounted Neodymium magnet. This changes the magnetic field produced by the magnet and deflects the field to create a powerful single sided holding magnet.

As a result of our magnets being very powerful on one side when compared to a raw magnet and because of the hole going through the thickness of the pot, they can be used as an excellent holding tool. Retail businesses no longer have to use permanent fixtures that damage property.

Instead, our pot magnets attach to any magnetic surface and by using the conveniently placed hole, can hang a wide range of items from signage to managing electrical cabling. Best of all they are completely removable should you need to relocate them.

Abrasion from this magnet may affect contact surfaces and due to this, we do not recommend that you use these magnets on fragile or sensitive surfaces. If you are wanting to use these in such areas we recommend the use of our rubber caps.

These rubber caps sit over the pot magnet and protect both the magnet and the surface they are being applied to.

Please be aware that using a rubber cap will reduce the pull force of the pot magnet. Because of this, we recommend that you use a larger pot magnet than you need. This is in order to make up for the loss in the pull force of the pot.

Neodymium pot magnets have a very high power to size ratio, even the smallest Neodymium magnets have a surprisingly large amount of pull. If subjected to temperatures of over 80°C Neodymium’s will start to permanently lose their magnetic properties. For high-temperature environments, we recommend the use of Samarium magnets.

 

As a result of these being so powerful and wanting to attract to each other, we must warn you of some potential hazards.

  • Magnets can be deadly if ingested, not recommended for children.
  • Use eye protection while using our magnets because if two join with force they may break or shatter.
  • Magnets can wipe magnetic media such as credit cards, keep magnets away from these to avoid data loss.

Related products